The Sanicare Hand Bidet you have ordered can be installed in a variety of convenient locations; either on the left or right side of your toilet. The only limitation is the length of the flexible hose. Although we have provided the most common plumbing fittings, should this unit not fit your toilet's plumbing we suggest that you take your bidet to your local hardware store to find the correctly sized fitting/adapter.
Installation:
	1.  Turn off the water valve at the base of the wall behind (near) the toilet as shown in Fig. 1-A 2.   Flush your toilet to drain all of the water from the toilet tank. A small amount of  water may remain in the tank, so you will want a small bowl and/or towel to catch it when you remove the hose in the next step. 3.   Disconnect the hose at the underside of the tank as shown in Fig. 1-B
	4.  Install The T-Connector fitting as shown in Fig.2 Connecting the T-fitting to the toilet and then the water supply hose to the bottom of the T-fitting. Use a piece of cloth or thin cardboard to protect the polished fitting from being scratched by the wrench.
	5.   Attach the Ceramic Shut-Off/Flow Control Valve to the outlet branch of the T Connector as shown in Fig.3 Be sure that the rubber gasket (washer) is in place between the fittings. Tighten Well.
	6.  Connect the flexible spiral metal bidet hose to the to the valve by placing the rubber gasket between the hose nut and the valve fitting. Tighten well. (See Fig. 4) 7.  Direct the free end of the flexible hose into the toilet bowl and then open the valves to flush out the bidet hose to remove any residue before connecting to the in-line valve and hand bidet.
	8.   (Optional) Attach the In-Line Control Valve to the free end of the bidet hose as shown in Fig.5. Be sure to insert a rubber gasket between the valve and the hose. Tighten well.
	9.  Attach the Hand Bidet Spray to the In-line Valve as shown in Fig. 6 (or to the free end of the hose if you did not install the optional In-Line Valve).  Be sure to insert a rubber gasket. Some Hand Bidet models may require a second rubber gasket to achieve a tight, leak-free connection. Test The Hand Bidet to ensure that there are no leaks
	10.  Attach the Hand Bidet Holder/Wall Bracket to the wall at a convenient and comfortable location using the screws and wall anchors provided as shown in Fig.7.   When mounting on a tile wall surface it is highly recommended that you drill the holes for the screws and wall anchors into the grout lines between the tiles to avoid damaging or cracking a tile.
Product Installation and Recommendations: The water pressure should be between 30 - 75 psi. This hand Bidet is a low-pressure device and for safety reasons not designed for connection to high-pressure outlets. Do not use toilet cleaners containing hydrochloric acid (HCL) to clean this bidet To avoid scratching the finish of your new bidet do not use abrasives such as a stiff brush, steel wool, or abrasive cleaners. Use a soft cloth to polish your Renaissance Hand Bidet to keep it looking bright and new. When not in use it is recommended that you turn the Ceramic Control Valve off to avoid any possible leakage. Should you experience any problems with your hand bidet it is recommended that you first disassemble and clean the unit before calling Technical Support at 1-800-878-4791 (option #3). Sanicare is always there to help you! Troubleshooting: Problem                            Checkpoint                       Solution -Cannot close water           1                                     Disassemble and clean -Water leaks around water  1                                     Disassemble and clean  control plate -Water does not flow          1                                     Use a cleaning pin by piercing through smoothly                                                                 the hose of the rinsing plate. -No or low water flow          1                                     Disassemble and clean   Sanicare 900, 1000 and Travel Bidet Models - One-Year Limited Warranty   100% Coverage of all parts and labor for the entire product for the first year from original date of purchase 1. SANICARE warrants its products to be free from manufacturing defects under normal use and service. This warranty is extended only to the ORIGINAL PURCHASER 2. SANICARE’S obligations under this warranty are limited to repairs or replacement, at SANICARE’S option, of products or parts found to be defective, provided that such products were properly installed and used in accordance with instructions. SANICARE reserves the right to make such inspections as may be necessary in order to determine the cause of the defect. SANICARE will not charge for labor or parts in connection with warranty repairs for the first full year from date of purchase. 3. SANICARE is not responsible for the cost of removal, return and/or reinstallation of products. This warranty does NOT apply to: a.       Damage or loss which occurs during shipment. b.       Damage of loss sustained through any natural or manmade causes beyond the control of SANICARE, including but not limited to fire, earthquake, floods, etc. c.        Damage or loss resulting from sediments or foreign matter contained in a water system. d.       Damage or loss resulting from negligent or improper installation including installation of a unit in a harsh or hazardous environment. e.       Damage or loss resulting from removal, improper repair, modification of the product, or improper maintenance including damage caused by chlorine or chlorine related products. 4. This warranty gives you specific legal rights. You may have other rights, which vary from state to state. THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY SANICARE. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO THE PURCHASER. SANICARE SHALL NOT BE RESPONSIBLE FOR LOSS OF USE OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL, FOR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE PURCHASER OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL OR COSTS OF REPAIRS BY OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY, ARE EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.